Ok, I have a new PC lam trimmer, I feel like a fool because I can not get the bit out of the
thing!
I am able to take a screwdriver and pop regular bits out, but my new Spiral but has no shoulders. What to do? GGggrrrrrr!
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| stuck bit http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=656 |
Page 1 of 1 |
| Author: | LanceK [ Sat Jan 08, 2005 6:59 am ] |
| Post subject: | |
Ok, I have a new PC lam trimmer, I feel like a fool because I can not get the bit out of the thing!
I am able to take a screwdriver and pop regular bits out, but my new Spiral but has no shoulders. What to do? GGggrrrrrr! |
|
| Author: | JJ Donohue [ Sat Jan 08, 2005 7:32 am ] |
| Post subject: | |
Tap the collet nut a few times |
|
| Author: | LanceK [ Sat Jan 08, 2005 7:46 am ] |
| Post subject: | |
WORKED~ DHO! Thanks JJ |
|
| Author: | Pwoolson [ Sat Jan 08, 2005 1:03 pm ] |
| Post subject: | |
Lance, you might put a dab of wax on the inside of the collett nut in order to release the collett. I had the same problem on a few different PC routers. That fix did a great job. Paul |
|
| Author: | John How [ Sat Jan 08, 2005 4:13 pm ] |
| Post subject: | |
I've also noticed that if I put the bit all the way in it sticks more often than if I don't let it bottom out. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|